I was going to part it out. The two Radiola interstage transformers were good.
The "restorer" could not get the knobs off, so he could not get the chassis out of the cabinet. "No sweat"' he thought. I'll just slather poly on everything - the dials, knobs and bezels included. But first, since I can't get the cabinet stripped of the old finish properly, I'll just scrape it with a knife(?).
Well, when he got done, it looked pretty good from around 10 feet away. Sue said that she liked it. So it was diverted towards 2 or 3 days of restoration which was mostly figuring out how to get the poly off of everything.
The "restorer" could not get the knobs off, so he could not get the chassis out of the cabinet. "No sweat"' he thought. I'll just slather poly on everything - the dials, knobs and bezels included. But first, since I can't get the cabinet stripped of the old finish properly, I'll just scrape it with a knife(?).
Well, when he got done, it looked pretty good from around 10 feet away. Sue said that she liked it. So it was diverted towards 2 or 3 days of restoration which was mostly figuring out how to get the poly off of everything.
Above: As found
The former owner managed to remove most of the character of the wood by scraping the front panel. So much so that the bezels were raised by a little lip where the scraper could not reach. So I added a little bit of grain and a knot or two prior to refinishing.
Completed 5-tube TRF - 4 each 199 and one UX 120 for audio output. I still need to find the paper instruction label for the underside of the lid.
RSS Feed